DESCRIPTION
BAHRAIN LUBRICANTS COMPRESSOR OIL PREMIUM are premium performance, ashless air compressor oils, based on narrow cut high quality mineral oils. Used in almost all compressors, reciprocating, rotary screw and rotary vane type machines with discharge temperatures up to 150°C in stationary and mobile installations.
APPLICATIONS
BAHRAIN LUBRICANTS COMPRESSOR OIL PREMIUM are designed primarily for rotary screw and vane air compressor, particularly for use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred. Suitable for units with a history of excess oil degradation, poor valve performance or deposit formation & are compatible with all metals used in compressor construction and with mineral-oil compatible elastomers used in seals, O-rings and gaskets, compressor systems with critical gears and bearings, units operating under severe conditions. Reciprocating air compressor crankcases and cylinders.
- For screw compressors: BAHRAIN LUBRICANTS COMPRESSOR OIL PREMIUM 32, 46, or 68
- For reciprocating compressors: BAHRAIN LUBRICANTS COMPRESSOR OIL PREMIUM 68, 100 or 150.
BAHRAIN LUBRICANTS COMPRESSOR OIL PREMIUM is not recommended for air compressors used in breathing air applications.
PRODUCT BENEFITS
- Excellent wear protection, offering extended equipment life
- Long-term protection against corrosion
- Reduced frequency of change of filter/ separators
- Highly effective rust and corrosion inhibition
- Allow a good oil/air and oil/condensates separation
- Avoid the carbon build up
RECOMMENDATIONS / SPECIFICATIONS
International Standards: ISO 6743-3 classified DAG & DAB for heavy duty applications, DIN 51 506 VD-L (100 & 150) Meets or exceeds the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE
TYPICAL TECHNICAL PROPERTIES
| ISO Viscosity Grade | 46 | 68 | 100 | 150 |
| Product code | 12607IL | 12608IL | 12609IL | 12610IL |
| Density at 15⁰C, g/ml, ASTM D4052 | 0.880 | 0.885 | 0.889 | 0.892 |
| Kinematic Viscosity at 40⁰C, mm²/s, ASTM D445 | 46 | 68 | 100 | 150 |
| Viscosity Index, ASTM D2270 | 100 | 100 | 100 | 100 |
| Flash Point(COC), °C, ASTM D92 | 238 | 248 | 276 | 284 |
| Pour Point, °C, ASTM D97 | -27 | -21 | -6 | -6 |
| Rust Characteristics; ASTM D665 | PASS | PASS | PASS | PASS |
| Conradson Residue, %, NF T 60116 | 0.13 | 0.11 | 0.04 | 0.11 |
