DESCRIPTION
BAHRAIN LUBRICANTS MARINE OIL POWER SAE 40 is a non-zinc and non-chlorine lubricant formulated with high-quality basestocks which provide low consumption characteristics, high-temperature oxidation resistance, and thermal stability. These base stocks are combined with specially selected stable additives resulting in an engine oil with well-balanced properties.
BAHRAIN LUBRICANTS MARINE OIL POWER SAE 40 meets the requirements of an SAE 40 grade marine diesel engine oil and is suitable wherever API CF and/or CF-2 performance is specified and is rated an LMOA Generation 4 lubricant.
APPLICATIONS
BAHRAIN LUBRICANTS MARINE OIL POWER SAE 40 has been specifically formulated to meet requirements of heavily loaded diesel engines manufactured by EMD and used in marine applications. It is suitable for other marine diesel engines of the highest horsepower, or higher brake mean effective pressure (BMEP) using distillate fuels with a sulfur content up to 1.5 percent. It will lubricate such engines in drilling rigs and stationary power generation service as well.
PROPERTIES
BAHRAIN LUBRICANTS MARINE OIL POWER SAE 40 is produced with high-quality base stocks and selected additives. These provide the oil with excellent lubricating properties, low consumption characteristics, high-temperature oxidation resistance and thermal stability. Also suitable for other high horsepower marine diesel engines using distillate fuels with a sulphur content up to 1.5%
PRODUCT BENEFITS
- Protects silver bearings
- Excellent detergent properties at high temperatures
- Good dispersant properties
- Protects against sludge formation
- Neutralizes acids produced in the combustion process
- High thermal and oxidation stability
- Effective anti-wear and load carrying properties
- High TBN and Outstanding TBN Retention
- Zinc and Chlorine free
- Excellent water tolerance and separation
- Controls carbon deposits and varnish formation, extending oil and filter life
RECOMMENDATIONS / SPECIFICATIONS
Meets or exceeds the quality requirements of the engines manufactured by Alco, Detroit Diesel (API CF-2) and Fairbanks Morse.
TYPICAL TECHNICAL PROPERTIES
| SAE Viscosity Grade | 40 |
| Product code | 12692ML |
| Density at 15⁰C, g/ml, ASTM D4052 | 0.897 |
| Kinematic Viscosity at 40⁰C, mm²/s, ASTM D445 | 139 |
| Kinematic Viscosity at 100⁰C, mm²/s, ASTM D445 | 14.1 |
| Viscosity Index, ASTM D2270 | 98 |
| Flash Point(COC), °C, ASTM D92 | 240 |
| Pour Point, °C, ASTM D97 | -18 |
| Total Base Number, mg KOH/g, ASTM D2896 | 13 |
| Sulphated Ash, wt%, ASTM D 874 | 1.6 |
