APPLICATIONS
BAHRAIN LUBRICANTS HYDRAULIC OIL AW 68 is designed to give excellent protection in mobile and stationary hydraulic vane-, piston-, and gear-type pumps and in high-performance industrial applications as well as in environmentally sensitive areas. Suitable for use in all kind of hydraulic systems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many other applications, where a universal high performance anti-wear lubricant is the first choice: low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.
PROPERTIES
BAHRAIN LUBRICANTS HYDRAULIC OIL AW 68 provides outstanding oxidation resistance allowing extension of oil and filter change intervals. Their high level of anti-wear properties and excellent film strength characteristics result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.
PRODUCT BENEFITS
- High protection against wear insuring maximum equipment life.
- Superior thermal stability avoiding formation of sludge even at high temperature.
- Very good oxidation stability ensuring a long service life of the fluid
- Quality reserve maintains performance features even under severe service conditions and extended drain intervals
- Excellent hydrolytic stability avoiding filter blocking.
- Excellent protection against rust and corrosion.
- Good anti-foam and air release properties by using silicon free components.
- Good demulsibility ensuring rapid water separation
- Reduced maintenance and operating costs
- Remarkable filterability even in the presence of water
RECOMMENDATIONS / SPECIFICATIONS
International Standards: AFNOR NF E 48-603 HM, ISO 6743/4 HM, DIN 51524 P2 HLP, CINCINNATI MILACRON P68, P69, P70
Meets or exceeds: VICKERS M-2950S, -I-286, DENISON HF0, HF1, HF2 (T6H20C), HUSKY HS 207
TYPICAL TECHNICAL PROPERTIES
ISO Viscosity Grade | 68 |
Product code | 12664HF |
Appearance, Visual | B&C |
Density at 15⁰C, g/ml, ASTM D4052 | 0.884 |
Kinematic Viscosity at 40⁰C, mm²/s, ASTM D445 | 68 |
Kinematic Viscosity at 100⁰C, mm²/s, ASTM D445 | 8.65 |
Viscosity Index, ASTM D2270 | 97 |
Flash Point(COC), °C, ASTM D92 | 230 |
Pour Point, °C, ASTM D97 | -24 |
FZG 4-Square Load Support, DIN 51354, Fail Stage | 12 |
Copper strip corrosion, 3 hrs @ 100°C, ASTM D130 | 1B |
Rust protection Proc B, ASTM D665 | PASS |
Note: These characteristics are typical of current production. While future production will conform to current specification, variations in these characteristics may occur.
Download TDS