BAHRAIN LUBRICANTS SEMI SYNTHETIC ENGINE OIL SAE 10W-40 API SN is enhanced-premium semi-synthetic motor oil meeting the latest industry engine oil specifications. They are designed to provide an excellent level of protection and performance under the most demanding conditions.
APPLICATIONS
BAHRAIN LUBRICANTS SEMI SYNTHETIC ENGINE OIL SAE 10W-40 API SN is formulated to give you confidence of protection beyond that of conventional oils. Particularly recommended for – Latest gasoline engine technologies, Passenger cars, SUV’s, light trucks and vans, Stop and Go City Driving, Normal to severe operating conditions, Turbo-Chargers & High Performance Engines.
PROPERTIES
BAHRAIN LUBRICANTS SEMI SYNTHETIC ENGINE OIL SAE 10W-40 API SN is high performance industry proven products so you can trust you will get the performance you want from your vehicle. Low friction semi-synthetic formulation increases engine efficiency and offers greater fuel economy & also helps to promote long engine life.
PERFORMANCE FEATURES AND BENEFITS
- Superior engine protection during start up
- Superior engine wear protection”
- Minimizes sludge formation
- Reduces wear by controlling soot deposits
- Extension of engine’s lifetime
- Reduced high temperature engine deposits
- Reduces wear due to advanced base oils
- Can be used in both Diesel & LPG engines
- Provides improved fuel economy”
- Suitable for hydraulically actuated injectors
- Safe for wet clutch motorcycles
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
RECOMMENDATIONS / SPECIFICATIONS
International Standards : API SN, ACEA: A3/B4,C3, ILSAC GF-5, GF-4, JASO SG+
MEETS OR EXCEEDS
Opel GM-LL-A/B-025, RN0700, RN0710, MB 229.3/229.1/229.31, Fiat 9.55535-N2 & 9.55535-M2/S2, BMW LL-01/ LL-04, VW 502.00/505.00, Ford WSS-M2C937, WSS-M2C947-A, WSS-M2C945-A, , Chrysler MS 11106, Porsche A40
Meets quality requirements of most gasoline engine manufacturers in the USA, Europe, Japan and Korea
TYPICAL TECHNICAL PROPERTIES
| Viscosity Grade, SAE J300 | 10W-40 |
| Product code | 12413AL |
| Density at 15⁰C, g/ml, ASTM D4052 | 0.867 |
| Cold Cranking Viscosity(CCS), mPa s, ASTM D5293 | 6600 @-25⁰C |
| Kinematic Viscosity at 40⁰C, mm²/s, ASTM D445 | 95 |
| Kinematic Viscosity at 100⁰C, mm²/s, ASTM D445 | 14.3 |
| Viscosity Index, ASTM D2270 | 155 |
| Flash Point(COC), °C, ASTM D92 | 224 |
| Pour Point, °C, ASTM D97 | -36 |
| Total Base Number, mg KOH/g, ASTM D2896 | 10.2 |
Note: These characteristics are typical of current production. While future production will conform to current specification, variations in these characteristics may occur.
Download TDS